A stepper motor driver is an actuator that converts electrical pulses into angular displacements, and is mainly used to control the movement of stepper motors. It precisely controls the number of steps, speed, and direction of the stepper motor by receiving pulse signals from the control system

Thumb

Avatar

0 repins 0 comments

The working principle of the linear stepper motor is to engage the screw with the nut and use a certain method to prevent the screw nut from rotating relative to each other, thereby causing the screw to move axially.

Thumb

Avatar

0 repins 0 comments

The brushless DC motor is a typical mechatronics product, consisting of a motor body and a driver. ‌It has no brushes and commutators, and uses an electronic commutator to control the direction of the current to achieve the rotation of the motor.

Thumb

Avatar

0 repins 0 comments

Integrated stepper motors‌ are devices that integrate motors and drivers into one, and control the rotation angle of the motor through electrical pulse signals. Each pulse signal causes the motor to rotate a fixed step angle, usually 1.8 degrees or 0.9 degrees.

Thumb

Avatar

0 repins 0 comments

The working principle of the gear stepper motor is to convert electrical pulse signals into mechanical motion, and control the rotation direction and step distance of the motor by changing the energization sequence of the windings. Specifically, the gear stepper motor receives electrical pulse signals to drive the stator winding inside the motor to generate a magnetic field.

Thumb

Avatar

0 repins 0 comments

A closed-loop stepper motor is a motor that combines the characteristics of a stepper motor and a servo motor, and achieves high precision and high efficiency through closed-loop control. A closed-loop stepper motor can remain absolutely still when stationary, and will not have slight fluctuations when stopped like a servo motor.

Thumb

Avatar

0 repins 0 comments

A servo motor is an engine that controls the operation of mechanical components in a servo system. It is an auxiliary motor indirect speed change device. The servo motor can control the speed and position accuracy very accurately, and can convert the voltage signal into torque and speed to drive the control object.

Thumb

Avatar

0 repins 0 comments

The working principle of waterproof stepper motors mainly includes two aspects: magnetic field drive and waterproof design. The stepper motor passes electricity through one or more sets of coils in the stator in turn. The current in the coil generates a magnetic field.

Thumb

Avatar

0 repins 0 comments

The working principle of geared stepper motors is based on the basic working mechanism of stepper motors and combined with the transmission function of gearboxes. A stepper motor is an electric motor that converts electrical pulse signals into angular displacement or linear displacement.

Thumb

Avatar

0 repins 0 comments

A closed-loop stepper motor is a motor that achieves closed-loop control by adding an encoder structure. ‌ This motor not only has all the functional characteristics of a stepper motor, but also implements a feedback mechanism in motion control, thereby improving the accuracy and stability of motion

Thumb

Avatar

0 repins 0 comments

An integrated stepper motor is a motor system that integrates stepper motor, driver, motion controller and encoder into a whole. This design greatly reduces the installation space and wiring requirements, improves the reliability and practicality of the system, and is particularly suitable for application scenarios with limited installation space and high integration requirements.

Thumb

Avatar

0 repins 0 comments

The definition of servo motors is an engine that controls the operation of mechanical elements in a servo system. It is an auxiliary motor indirect speed change device. The main function of a servo motor is to convert the input voltage control signal into the angular displacement and angular velocity output on the shaft to drive the control object.

Thumb

Avatar

0 repins 0 comments

A stepper motor encoder is a rotary sensor that converts mechanical rotational displacement into a series of digital pulse signals through a clever mechanism. These pulse signals are like a precision ruler, giving the motor the accuracy of movement.

Thumb

Avatar

0 repins 0 comments

The stepper motor brake is an additional device for stepper motors, designed to provide additional holding torque or to achieve rapid stopping and safe braking under certain conditions. The working principle of the stepper motor brake mainly relies on electromagnetic attraction and spring pressure when the power is off to achieve friction braking.

Thumb

Avatar

0 repins 0 comments

A planetary gearbox is a mechanical transmission device, also known as a planetary reduction box or gearbox. Its structural feature is that multiple planetary gears rotate around a sun gear. This mechanism design enables the planetary gearbox to reduce the transmission speed ratio and increase the torque of the motor proportionally.

Thumb

Avatar

0 repins 0 comments

A hybrid stepper motor is a motor that combines the advantages of a permanent magnet stepper motor and a reactive stepper motor. ‌ It achieves the complementary advantages of high torque and high precision through a specific structural design, thus providing a high-precision, combined stepper drive. Hybrid stepper motors are divided into two-phase, three-phase and five-phase, of which the two-phase step angle is generally 1.8 degrees, the three-phase step angle is generally 1.2 degrees, and the five-phase step angle is generally 0.72 degrees.

Thumb

Avatar

0 repins 0 comments

Small AC motors are relatively small in size and power and are suitable for specific application scenarios.The application fields of small AC motors include but are not limited to household appliances, office equipment, and automation control systems.

Thumb

Avatar

0 repins 0 comments

A two-phase stepper motor is an actuator that converts electrical pulses into angular displacement. ‌When the stepper driver receives a pulse signal, it drives the stepper motor to rotate a fixed angle (i.e., step angle) in the set direction. By controlling the number of pulses, the angular displacement can be controlled to achieve the purpose of accurate positioning; at the same time, by controlling the frequency of the pulses, the speed and acceleration of the motor rotation can be controlled to achieve the purpose of speed regulation.

Thumb

Avatar

0 repins 0 comments

Hybrid stepper motors also called HB stepping motor, combine the features of variable reluctance stepper motor and permanent magnet step motor. It controls the angle movement by controlling the impulse imput, so that it could realize an accurate positioning. They are widely used in so many machines that used every day personally or commercially

Thumb

Avatar

0 repins 0 comments

Choosing the right stepper driver for you stepper motor is important because it will allow you to get the maximum amount of performance out of your motor. To choose the correct stepper driver, buyers must consider their budget, the intended application of the stepper motor, and the required features.

Thumb

Avatar

0 repins 0 comments

Planetary gearboxes are a type of mechanical transmission device, also known as planetary reduction gearboxes or gearboxes. Their structural characteristics are that multiple planetary gears rotate around a sun gear to form a special gear mechanism

Thumb

Avatar

0 repins 0 comments

‌Hybrid stepper motors are designed by combining the advantages of permanent magnet stepper motors and reactive stepper motors. ‌ Through a specific structural design, it achieves the complementary advantages of high torque of permanent magnet stepper motors and high precision of reactive stepper motors.

Thumb

Avatar

0 repins 0 comments

It mainly relies on the interaction between the stator and the rotor, and generates a rotating magnetic field by controlling the flow of current, thereby driving the rotor to rotate. The structure of a two-phase stepper motor includes a stator and a rotor, in which the stator is usually made of laminated silicon steel sheets and has four magnetic poles, which are 180 degrees apart in space. The rotor is a two-pole rotor with an N pole and an S pole.

Thumb

Avatar

0 repins 0 comments

Pancake stepper motor is a special motor that controls the motor step by electric pulse. Its structure is similar to that of DC motor, mainly composed of stator, rotor, end cover, rotor shaft, front and rear plates and stator coil. Pancake stepper motor can convert electric pulse signal into corresponding angular displacement or linear displacement. For each input pulse signal, the rotor rotates an angle or moves forward. The output angular displacement or linear displacement is proportional to the input pulse number, and the speed is proportional to the pulse frequency.

Thumb

Avatar

0 repins 0 comments

A stepper motor encoder is a device that compiles and converts signals or data into a signal form that can be used for communication, transmission and storage. It is usually installed on a stepper motor. The stepper motor itself is an actuator, and the encoder belongs to a feedback system that is used in conjunction with the stepper motor. The running position and speed of the stepper motor can be accurately controlled through the feedback signal of the encoder.

Thumb

Avatar

0 repins 0 comments

The brake stepper motor is a special type of motor that is equipped with an encoder, a reducer and a brake device on the basis of a stepper motor. ‌The main feature of this motor is that when the power is off, the brake device tightly holds the motor shaft to achieve the locking function of the motor in the power-on or power-off state. The design and application of brake stepper motors are intended to improve the application range, performance, etc. of the motor, while ensuring that the motor can be accurately stopped and positioned when needed.

Thumb

Avatar

0 repins 0 comments

Planetary gearboxes, also known as planetary reduction boxes or gearboxes, are basically composed of multiple planetary gears rotating around a sun gear. This structure not only reduces the transmission speed ratio, but also proportionally amplifies the torque of the motor. Planetary gears can generally be divided into simple planetary gears and complex planetary gears. Simple planetary gears include a sun gear, an outer gear ring, a planetary gear and a planet carrier. Complex planetary gears contain more gear trains, which may include multiple planetary gear trains and sun gear trains, and have the characteristics of high reduction ratio and high torque.

Thumb

Avatar

0 repins 0 comments

The structural features of hybrid stepper motors are mainly reflected in the design of their stators and rotors. Hybrid stepper motors consist of two parts: stator and rotor. The stator usually has 8 poles or 4 poles, and a certain number of small teeth are evenly distributed on the pole surface. The coil on the stator can be energized in two directions to form phase A and phase B. The rotor consists of two tooth plates with a certain number of small teeth evenly distributed on the circumference, and the two tooth plates are staggered by half a tooth pitch. An axially magnetized annular permanent magnet is sandwiched between the two tooth plates. All teeth on the same section of the rotor plate have the same polarity, while the polarities of the two different sections of the rotor plates are opposite. This design makes the hybrid stepper motor have unique application value in the field of mechatronics.

Thumb

Avatar

0 repins 0 comments

Brushless DC motors are a type of motor drive that combines synchronous motors and electronic control technology. They control the frequency of the stator's rotating magnetic field through electronic control (driver, including power supply and control), and feed back the motor rotor's speed to the control center for repeated correction to achieve a method close to the characteristics of a DC motor. This type of motor can control the motor rotor to maintain a certain speed within the rated load range when the load changes. Brushless DC motors do not have traditional brushes and commutators, so they have higher energy efficiency and longer service life, and are widely used in fields that require high performance and high reliability.

Thumb

Avatar

0 repins 0 comments

Brushless DC motors are a type of motor drive that combines synchronous motors and electronic control technology. They control the frequency of the stator's rotating magnetic field through electronic control (driver, including power supply and control), and feed back the motor rotor's speed to the control center for repeated correction to achieve a method close to the characteristics of a DC motor. This type of motor can control the motor rotor to maintain a certain speed within the rated load range when the load changes. Brushless DC motors do not have traditional brushes and commutators, so they have higher energy efficiency and longer service life, and are widely used in fields that require high performance and high reliability.

Thumb

Avatar

0 repins 0 comments

Next Page